• VSM-4000U-RP

  • Giá bán: Liên hệ
  • Centralizing Sites with Ease


Hardware Spec.
Model Name VSM-4000U-RP
Number of license Base: 64, Maximum:1,024
HDD Maximum 4TB per HDD
4 x Hot-swappable HDD and lockable tray (2.5'' or 3.5'')
CPU Intel® Dual-core Processor
Operating System Linux Embedded
Ethernet Port 2 x Gigabit RJ-45 Ethernet port
Voltage 110~240V
Power Consumption 52W
Dimensions (HxWxD) 44 (H) x 439 (W) x 499 (D) mm
1.73 (H) x 17.28 (W) x 19.65 (D) inch
Weight (w/o HDD) Net weight: 7.63 kg (16.82 lbs)
Gross weight: 9.55 kg (21.05 lbs)
Operating Temperature 0~40˚C/ 32~104˚F
Operating Humidity 5~95% RH non-condensing, wet bulb: 27˚C.
Languages Czech/ Danish/ Dutch/ English/ French/ Finnish/ German/ Hungarian/ Italian/ Japanese/ Korean/ Norwegian/ Polish/ Portuguese/ Russian/ Spanish/ Swedish/ Simplified Chinese/ Traditional Chinese
Software Spec.
Server Configuration
Operating System Linux Embedded
Interface Web browser: IE, Google chrome, Firefox
System Administration
General Settings
System Administration Set the CMS Server Name and System Port,
Enable Secure Connection (SSL): when SSL is enabled, the users can only connect to the CMS via the https connection
Date and Time Setup Time Zone, Date Format,
Time Setting:
Manual Setting, Synchronize with an Internet Time Server (NTP) automatically, Set the server time the same as the computer time
Daylight Adjust system clock automatically for daylight saving time
Saving Time Enable customized daylight saving time table
TCP/IP Use static IP address
Obtain IP address automatically from DHCP server
Enable CMS server as the DHCP server
DDNS Select the DDNS server
Enter the username/password/domain name to register with the DDNS provider
Power Management Restart, Shutdown
Power-on the CMS server automatically after the AC power resumption, or to remain power-off after the power resumption
Backup / Restore / Reset Settings Support
System Logs System event logs, System connection logs, On-line users
Firmware Update Support
Disk Management
RAID Management VSM-2000 (2bays): RAID 0,1
VSM-4000U-RP (4 bays): RAID 0,1,5,6,10
Online RAID Level Migration without turning off the CMS server
RAID Recovery without turning off the CMS server
HDD Smart Bad Block Scan & Hard Drive S.M.A.R.T
System Status
System Information Check the Server Name, Firmware Version, System Up Time, Serial Number
Resource Monitor Check the CPU Usage, Memory Usage, Disk Usage, Bandwidth Transfer, Process
Client Configuration
Operating System Windows 7 (64 bits preferred)
Interface QNAP CMS client software
Dashboard Alarm: alarm input, motion alarm
User account: login error, never login
Hardware status: NVR disconnection, camera disconnection, HDD failure, fan failure
License Activate license online
Activate license offline
Server Centrally configure up to 128 NVRs
Available configurations made on NVRs:
* Shutdown, Reboot, Update firmware, Synchronize settings with NVR,
* Edit IP: assign static IP manually
* Edit system time: manually set the time zone, automatically synchronize with an Internet time server
* Edit alert notification: E-mail, SMS settings
The above configurations can be synchronized by grouping devices of the same NVR model.
Camera Centrally configure up to 1,024 cameras
Available configurations made on cameras:
* Edit recording parameters (codec, resolution, FPS), quality
* Enable audio recording, manual recording
* Set recording schedule
The above configurations can be synchronized by grouping devices of the same camera model.
Event Management Centrally receive events from multiple NVRs
Event from camera: motion detection, camera I/O
Event from hardware: NVR disconnection, camera disconnection, fan failure, HDD failure
Centrally configure the view from multiple NVRs
View layout:
1, 2X2, 3X3, 4X4, 5X5, 6X6, 7X7, 8X8, 1+1+4, 1+5, 1+7, 2+8, 1+11, 1+12, 12+1
View can be managed by creating video group for security guard's easier monitoring
Sequential mode:
Each slot can be composed of multiple camera channels to form a sequential mode
The interval between each camera video’s display is adjustable
E-map Centrally setup E-maps for multiple NVRs
Available E-map format: JPEG, PNG, BMP Device indicators on E-map: NVR, camera, link to other E-maps Unlimited E-map layers
Flexible and easy editing of E-map links for multi-directional E-map management
User Managemen
Users can be created and assigned to different user group. Each user group can have different permission of:
.Feature access:
* Administrator: System operation, User Management, View Management, E-map Management, Log Out
* Client Live View: Information, Camera control, Bookmark, Snapshot, Event log
* Client Playback: Export, Bookmark, Snapshot
.Device access: NVR, camera
.View access
.E-map access
Server Log Sever, System event, NVR event, On-line users
CMS Server Configuration Configure SMTP server, SMS server
Live View
Monitor Mode Live View, E-map, Playback, and Configuration
Central Monitor Connect up to 1,024 camera channels from up to 128 NVRs
Display up to 64 camera channels per monitor
Display up to 512 cameras per CMS client PC (depending on PC specification and video stream profile)
View Layout 1, 2X2, 3X34, 4X, 5X5, 6X6, 7X7, 8X8, 1+1+4, 1+5, 1+7, 2+8, 1+11, 1+12, 12+1
Content List View, E-map, NVR (camera)
The content list window can be auto hidden, leaving more room to display the camera video.
View Content Flexible view content of mixed camera videos and E-maps
Camera Control Connect to the camera webpage,
Enable manual recording,
Enable digital zoom,
Zoom in,
Zoom out,
Enable audio input,
Enable audio output,
Focus near,
Focus far,
Fit image to window,
Keep aspect ratio,
PTZ panel
The camera control panel can be auto hidden, leaving more room to display the camera video.
E-map When event occurs, the camera icon will turn into red indicator to show the event location.
When double-click the camera icon, the live view video will pop up to show the instant status.
Unlimited E-map layers
Multi-directional E-map links
Alarm Mode When event happens, the alarm indicator will flash and can be clicked to enter the alarm mode.
When enabling the alarm mode:
1) The snapshot of the alarm will be shown on the Alarm List
Maximum number of snap shot kept on the Alarm List: 15
2) The log of the alarm will be shown on the Event Log
Maximum number of log shown on the Event Log: 150
Based on each alarm snapshot and the alarm log, the operators have 4 types of event instant handling options:
1) Open live view,
2) Open event playback (30 seconds before and after the event),
3) Go to live view layout,
4) Go to e-map layer
Bookmark For the easier event tracking:
Click Quick Bookmark to place a vertical thin bar on video footage.
Click Detailed Bookmark to place a vertical thin bar on video footage, and text details accordingly.
Sequential Mode Each slot can be composed of multiple camera channels to form a sequential mode.
Sequential mode can take place only in the selected slots.
The interval between each camera video’s display is adjustable.
Sequential mode can be easily enabled or paused on live view page.
Shortcut Up to 5 most used view layout or E-map can be dragged onto the top of the window for quicker access
Central Playback Up to 16 channels from 16 NVRs
View Layout 1, 2X2, 3X3, 4X4
Video Time Frame Maximum time length is 24 hours, and can be cross the other day.
Content List NVR (camera)
The content list window can be auto hidden, leaving more room to display the camera video.
Video Operation
Play, Pause, Stop, Play rewind, Speed up, Speed down, Play the next frame, Play the previous frame, Enable audio output,
Place quick bookmark, Place detailed bookmark, Export video (AVI format),
Enable digital PTZ, Zoom in, Zoom out, Fit image to window, Keep aspect ratio, Sync playback, Non-sync playback
Sync playback:
All channels are displayed based on the identical timeslot.
Non-sync playback:
Each channel can be assigned to display different timeslot.
Information of each channel On slot bar: Camera name,
OSD: Date, time
Timeline Timeline can be stretched wider for easier video searching
Number of CMS Client Installation Depending on NVR available total connections
Supporting QNAP VioStor NVR NVR Firmware version: v. 4.1.0 and above
Client PC Requirement (Suggested system requirement for better video performance)
CPU M-JPEG format (up to 64 channels ): Quad core CPU 2.33GHz or above
MPEG-4/ H.264/ MxPEG format (up to 64 channels ): Core i7 CPU 2.8GHz or above

* * For higher surveillance performance, please select more advanced PC models.
Memory 4 GB or above
Graphics Adapter RAM: 2G ( nvdia GT640 or about), PCI-Express x 16, minimum 1024 x 768, 16-bit color (Suggested 1920x1080, 16bit)
Operation System Microsoft Windows 7/ 8
Web Browser Microsoft Internet Explorer 10/11 (Windows PC, desktop mode, 32-bit)
Google Chrome 38.0.2125.104 m (Windows PC)
Mozilla Firefox 33.0 (Windows PC)
Network Interface 10/100/1000 Mbps
Display Resolution 1280 x 800 pixels or higher for better user experience
(Recommendations resolution 1920x1080)
Client CMS Client for Windows